Support for DJI OM 4 SE

Yes.

The magnetic force of DJI OM 4 SE is 50 Newtons, which is definitely strong enough to keep your smartphone attached. The strength of 50 Newtons is roughly equivalent to the weight of more than two 2L bottles of soda.

DJI OM 4 SE will not affect the performance of the phone attached to it. However, some phones may require calibration after mounting. The magnetic design may influence other magnetic products. Do not put OM 4 SE near a bank card, cardiac pacemaker, hard drive, or similar devices.
NFC and MST payment options use magnetic technology for the transaction. Due to the magnetic design on DJI OM 4 SE, this may interfere with these payment options. DJI recommends that users use the magnetic phone clamp if they use these payment options frequently.

For more information, please refer to the phone compatibility list on the official DJI website.

Attach your phone to the phone clamp or ring holder, and mount it to OM 4 SE magnetically. Avoid pinching your fingers and ensure the phone is mounted securely.

Due to wide-angle lenses and phone sizes, some users may see the gimbal in camera view.
Users can try the following:
Adjust the position of the magnetic phone clamp and move it away from the camera until the gimbal is excluded from the camera view.

No. Due to powerful motors, accurate balancing is not needed for DJI OM 4 SE. When using the magnetic phone clamp, you only need to keep it approximately in the middle of the phone; when using the magnetic ring holder, please follow the instructions and attach it correctly.

For detailed information, please refer to the phone compatibility list on the official DJI website.

Yes. Connect your phone to OM 4 SE, launch the DJI Mimo app, tap the gesture icon next to the shutter and tap (?) to view detailed instructions. OM 4 SE can recognize the “palm” and “V” gestures.

There are three ways to use ActiveTrack:
1. Press the trigger to track the subject in the middle of the frame automatically;
2. Manually select and track the subject in the app interface;
3. Enable Gesture Control and use a gesture in (?) to begin tracking, take a photo, or record a video.

Power on OM 4 SE, and press the M button twice to switch between the two orientations. You can also transition between portrait and landscape by rotating the roll axis manually.

1. Power on DJI OM 4 SE and press the M button till you hear a beep indicating the gimbal is already in Standby mode;
2. Power on OM 4 SE and press the M button three times to enter Standby mode. Once standby mode is enabled, press any button to exit the mode.

When the gimbal is in video, slow motion, or Hyperlapse mode, go to settings and enable SpinShot. Use the joystick to complete a spin shot of 270 degrees.

Go to Story mode in camera view and select Custom Story.

Tap DynamicZoom mode in camera view, and start using this function by walking steadily forward or backward.

Select CloneMe from Pano, tap the shutter, and OM 4 SE will automatically take a photo every five seconds and move the gimbal to the next position. After taking three photos, it will automatically stitch them into one photo.

Power on DJI OM 4 SE, then press and hold the trigger to lock the gimbal.

1. Connect your phone with DJI Mimo app and enable Sport mode in settings;
2. Power on DJI OM 4 SE, press the trigger, and then press again and hold to switch to Sport mode. Once you release the trigger, Sport mode will be disabled.

Make sure the gimbal is powered on and working normally, then quickly press the trigger twice to recenter the gimbal.

1. Switch between the front and back cameras in the DJI Mimo app;
2. Quickly press the trigger three times.

Yes.

Connecting via Bluetooth is faster than connecting via Wi-Fi. Devices using Bluetooth will link automatically once they are paired. Connecting via Bluetooth also saves more energy than connecting via Wi-Fi does.

1. Forget connected devices in the Bluetooth settings of your mobile phone.
2. Press and hold the shutter button, trigger, and M button simultaneously for one second to forget the connected device.

No. DJI Mimo app will provide the correct firmware version once connected.

When the firmware is updating, the status indicator will flash red and green. If the firmware update is successful, the indicator will turn solid green. If the firmware update fails, the indicator will flash red and green, and simultaneously, you will be notified in the DJI Mimo app.

1. Restart the gimbal and try again;
2. If your phone still fails to connect with DJI OM 4 SE, please contact DJI After-Sales.

Use the adjustable zoom slider on the left side of the handle to zoom in and out. Image quality is subject to the phone's camera performance.

There are 4 modes: Upright, Underslung, Flashlight, and Side Grip.

No.

1. Check if the phone has been properly mounted onto the gimbal;
2. Perform Gimbal Auto Calibration;
3. Perform Horizontal Gimbal Adjustment in the DJI Mimo app.

1. It is not recommended to attach the ring holder to a phone case;
2. Phone cases can be used with the magnetic phone clamp.

1. Brand-new magnetic quick-release design for a more convenient mounting experience;
2. DJI OM 4 SE is integrated with new intelligent shooting modes such as DynamicZoom and CloneMe;
3. DJI OM 4 SE supports Flashlight mode.
4. DJI OM 4 SE has a stronger motor.