FAQ

The DJI Mavic 3 Series comes in three versions: Mavic 3 Classic, Mavic 3, and Mavic 3 Pro.

Mavic 3 Classic has a 4/3 CMOS Hasselblad camera and a max flight time of approximately 46 minutes.
Mavic 3 has two cameras. It adds a 162mm tele camera compared to the Mavic 3 Classic, and has a max flight time of approximately 46 minutes.
Mavic 3 Pro has three cameras, including a 4/3 CMOS Hasselblad wide-angle camera like the Mavic 3 Classic and Mavic 3. Additionally, it has a new 1/1.3-inch CMOS 70mm medium tele camera and an upgraded 166mm tele camera. The Mavic 3 Pro delivers enhanced imaging performance and a max flight time of approximately 43 minutes.

The DJI Mavic 3 Series is only compatible with DJI Goggles 2, DJI Goggles Integra, and DJI RC Motion 2.

DJI Mavic 3 Pro (DJI RC) includes a DJI RC, a DJI 65W Portable Charger, and an Intelligent Flight Battery.
DJI Mavic 3 Pro Fly More Combo includes a newly upgraded DJI 100W USB-C Power Adapter, a Battery Charging Hub (100W), two extra Intelligent Flight Batteries, an ND Filters Set (ND8/16/32/64), and a DJI Shoulder Bag.
Compared with the DJI Mavic 3 Pro Fly More Combo, the DJI Mavic 3 Pro Cine Premium Combo includes DJI Mavic 3 Pro Cine with a built-in 1TB SSD and a DJI 10Gbps Lightspeed Data Cable for high-speed data transmission.
You can choose a combo based on your needs.

Use the DJI 10Gbps Lightspeed Data Cable in the box to connect the aircraft to your computer via the USB-C port. Ensure your storage device's write speed is greater than 700 MB/s.
Using other data cables is not recommended since they may take longer to transfer files, as high-speed transmission may not be supported.

When using the DJI Mavic 3 Pro Series, you can switch between the cameras in several ways.
If you're using the camera in Explore mode, using either picture or video, you can use the camera control wheel to zoom in digitally from 1x to 3x, 3x to 7x, and 7x to 28x. When you scroll through the zoom digitally, you only switch to a different lens when the amount of zoom reaches the next lens's optical zoom.
In all of the other Photo modes: Single, AEB, Burst, and Timed Shot, you can only access the optical zoom of each lens by tapping 1, 3, and 7 on the screen in the camera view.
In Video Modes, you can use the camera control wheel to zoom digitally or click the respective optical zoom numbers on the screen in the camera view. Selecting the zoom via tapping on the screen automatically switches to the lens at that focal length.

The DJI Mavic 3 Pro series supports Pro mode in Normal Photo mode and Normal Video mode, but not in Explore mode.

The medium tele camera and tele camera support taking RAW photos in normal photo mode but not in Explore mode.

No. You need to use other software on your computer to stitch and generate panoramic photos.

Yes. All three cameras of the DJI Mavic 3 Pro Series support SmartPhoto. SmartPhoto needs to take multiple photos continuously for image synthesis. When the aircraft is moving or using the medium tele camera at 48MP resolution, SmartPhoto will be unavailable. Image results may differ.

If you are using DJI RC, once you enable Vision Assist, the primary video transmission quality will be reduced to 720p, and the camera view displayed on the screen may appear slightly blurrier than before.

DJI RC Pro, DJI RC, and DJI RC-N1.

When using the DJI RC Pro, DJI RC, or DJI RC-N1, the max video transmission range is 15 km.

Once video recording is set to 30fps or above at any resolution, the frame rate of the live feed will automatically switch to 48/50/60fps depending on the mobile device's decoding capability and transmission bandwidth.

No.

Yes.
1. Once linked with a DJI Mavic 3 Series aircraft, the DJI RC-N1 remote controller will automatically update the firmware if necessary. The DJI RC-N1 supports the O3+ video transmission like the DJI RC Pro and DJI RC.
2. In an unobstructed environment free of interference, these remote controllers can support a max transmission range of 15 km with FCC compliance.
3. These remote controllers support 1080p/60fps live feeds.

When used with different aircraft, These remote controllers will automatically select the corresponding firmware version for updating and support the following transmission technologies enabled by the hardware of the linked aircraft:
a. DJI Mini 3/DJI Mini 2/DJI Mavic Air 2: O2
b. DJI Mini 3 Pro/DJI Air 2S: O3
c. DJI Mavic 3 Series: O3+

If any propeller is damaged or misshaped, replace the propeller promptly to ensure a safe flight.

Attach the propellers with gray markings to the motors with identical gray markings, and attach the other two unmarked propellers to the corresponding unmarked motors. Go to the Propellers section of the Mavic 3 Pro User Manual for more information on how to attach the propellers to the aircraft.

The flight time was measured in a controlled test environment. Specific test conditions are as follows: flying at a constant speed of 32.4 kph in a windless environment at sea level, with APAS off, AirSense off, camera parameters set to 1080p/24fps, video mode off, and from 100% battery level until 0%.
Results may vary depending on the environment, actual use, and firmware version.

The DJI Mavic 3 Series can detect obstacles in all directions with precision. Multiple sensing cameras with a broader detection range help the Mavic 3 Series respond to obstacles earlier. In a well-lit environment, the Mavic 3 Series can avoid obstacles faster and more smoothly, capturing stable footage safely even when flying laterally or backward.

ActiveTrack 5.0 can track subjects in eight directions, enabling more creative possibilities. Embedded with the newest subject recognition technology, ActiveTrack 5.0 uses multiple vision sensors simultaneously to recognize a subject, differentiate it from other objects, and lock the subject in the frame. It allows users to adjust tracking angles smoothly for more natural results. Thanks to the new environment and subject-sensing algorithms, the DJI Mavic 3 Series responds earlier to subject movements and environmental information and plans a more optimal tracking route to record smooth and stable footage.

Compared with a max forward-sensing distance of 20 meters from previous generations, the DJI Mavic 3 Series has a max forward-sensing distance of 200 meters during RTH. During the flight, the DJI Mavic 3 Series will use advanced environmental sensing technology to determine the safest, most energy-efficient flight route to return to its home point.

In Nifty mode, the obstacle detection sensitivity is lowered. Bypass maneuvers will be less sudden and sharp, which reduces the impact of obstacle avoidance movements on your footage.

With the Wi-Fi 6 protocol, data transmission is even faster, with download speeds reaching up to 80 MB/s. In addition, compared with DJI Mini 2, the DJI Mavic 3 Series automatically selects the fastest transmission mode based on its wireless environment without switching to Wi-Fi mode manually, making it easier to use.

Approximately 96 minutes when charging with the connected USB-C charging cable of the DJI 65W Portable Charger.
Approximately 70 minutes when charging with the DJI 100W USB-C Power Adapter and charging cable.

Yes. However, to ensure charging efficiency, we recommended using the DJI 65W Portable Charger, DJI 100W USB-C Power Adapter, or other chargers at 60W or above that support the PPS/PD protocol.

Yes.

The following accessories are currently compatible:
1. DJI RC
2. DJI RC Pro
3. DJI RC-N1
4. DJI Mavic 3 Series Intelligent Flight Battery
5. DJI Mavic 3 Series Low-Noise Propellers
6. DJI Mavic 3 Series Battery Charging Hub
7. DJI 65W Car Charger
8. DJI 65W Portable Charger
9. DJI Convertible Carrying Bag
10. DJI 10Gbps Lightspeed Data Cable

The following accessories are not compatible:
1. DJI Mavic 3 Storage Cover
2. DJI Mavic 3 Classic Storage Cover
3. DJI Mavic 3 Series Propeller Guard
4. DJI Mavic 3 Series Protector Case
5. DJI Mavic 3 ND Filters Set and DJI Mavic 3 Classic ND Filters Set
6. DJI Mavic 3 Wide-Angle Lens and DJI Mavic 3 Classic Wide-Angle Lens