Rx10 III + DJI Ronin-SC Compatibility result
| Control Features/Cable | Ronin-SC Multi-Camera Control Cable (Multi) (in the box) |
|---|---|
| Capture photo |  |
| Start/stop recording video | |
| Zoom control (digital or optical) | |
| Trigger auto focus | |
Setup Method
Notes
- The current camera firmware version was the same used in testing.
- This list is updated according to the latest firmware and is subject to change without notice.
- Lens compatibility information is regularly updated after testing is completed. If not listed, other lenses may be compatible if mechanical balance can be achieved on Ronin-SC.
- To reduce the overall weight, Ronin-SC's balance dimensions are limited; some cameras do not support Flashlight mode after balancing. Flashlight mode is officially supported when internal testing is carried out with only the camera mounted, with the viewfinder's eyepiece possibly needing removal. This list is for reference only. Please follow actual use results.
- If the lens in the compatibility list does not support Flashlight mode, the gimbal’s range of motion may be restricted after balancing.
- Some cameras may stop working due to slow or failed focusing in complex environments such as low lighting. When taking photos or recording videos, it is recommended to use manual focus.
- When taking photos or recording videos, it is recommended to turn off the camera’s auto review (Sony) or image confirmation (Canon) to reduce system latency.
- The total payload (camera, lens, phone holder, iPhone XS, and focus motor) in the list is for reference only.
- An iPhone 6 was used as the model for illustration of installing the phone holder. Due to the variety of mobile devices, installed position may vary. The installation status in this list is for reference only. Please refer to the actual installation conditions.
- Due to the limitations of the USB protocol, the camera control cable will cause the gimbal to charge some cameras automatically. This may affect the gimbal’s battery life.
- The DJI Ronin-S/SC Focus Wheel is required to perform focus pulling. This accessory is sold separately.
