Internet Explorer is no longer supported. It is recommended to use other browsers.
Continue Viewing
Specs
Infrared Distance Sensor
Detection Range
0.1-10 m
FOV
20°
Accuracy [1]
5%
Robotic Arm
Movement Range
Horizontal: 22 cm, Vertical: 15 cm
Number of Axes
2
Gripper
Range
Approx. 10 cm
Servo
Weight
Approx. 70 g
Body Dimensions
44.2×22.6×28.6 mm
Transmission Ratio
512:1
Operation Modes
Angle mode, Speed mode
Sensor Adaptor
Port Type
IO, AD
Number of Ports
2
Power Connector Module
Communication Port
CAN bus (5)
Output
USB Type-A power port: 5V 2APower port with pin header: 5V 4ATX30 power port: 12V 5A
Input
TX30 power port: 12 V
Camera
FOV
120°
Max Still Photo Resolution
2560×1440
Max Video Resolution
FHD: 1080/30fps HD: 720/30fps
Max Video Bitrate
16 Mbps
Photo Format
JPEG
Video Format
MP4
Sensor
CMOS 1/4″; Effective pixels: 5 MP
Operating Temperature Range
-10 to 40 °C (14 to 104 °F)
Narrow Infrared Units
Effective Range [2]
6 m (in indoor lighting conditions)
Effective Area
Varies from 10° to 40° Effective area decreases as distance from the target increases.
Wide Infrared Units
Effective Range [2]
3 m (in indoor lighting conditions)
Effective Width
360° (in indoor lighting conditions)
Hit Detector
Detection Requirements
For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°.
Maximum Detection Frequency
15 Hz
EP
Weight
Approx. 3.3 kg
Dimensions
320×240×270 mm (length × width × height)
Chassis Speed Range
0-3.5 m/s (forward) 0-2.5 m/s (backward) 0-2.8 m/s (sideways)
Recommended outdoor power supply solution for routers
Laptop Power Bank (match the input power of the router)
microSD card
Supported SD Cards
Supports microSD cards with a capacity up to 64GB
Others
Notes
1. Applies to surfaces with reflectivitiy ranging from 10% to 90%.
2. Use of the infrared units will be affected in outdoor or infrared-intensive environment.
3. Measured in an interference-free and unobstructed enviroment with a distance of approximately one meter between the mobile device, the router, and the EP. The iOS device used was an iPhone X. The results of testing with different Android devices may be different.
4. Outdoor use of the 5.1 GHz and 5.8 GHz frequency bands is prohibited in some areas. Always follow all local laws and regulations in your country or region.
5. Measured in an interference-free and unobstructed environment. For Connection via Wi-Fi, the mobile device used for testing was a sixth-generation iPad (released in 2018). For Connection via Router, several router models were used for testing. FCC: TP-Link Archer C9; SRRC: TP-Link WDR8600; CE: TP-Link Archer C7; MIC: WSR-1160DHP3.
6. The gel beads will swell to a usable size after being soaked in water for four hours.
We Value Your Privacy
We use cookies to personalize and enhance your browsing experience on our websites. You can manage your settings at any time through Cookie Preferences or read our Cookie Policy to learn more.
Cookie Preferences
Cookies are small files which, when placed on your device, enable us to provide certain features and functionality of DJI websites and online services to you. We use the following types of cookies on our websites. View Cookie Policy for full details.