Online Customer Service

Monday - Sunday: 6:00 - 18:00 (PST/PDT)

Hotline Service

English: +1 818 235 0789
Monday - Sunday: 6:00 - 18:00 (PST/PDT)

DJI Store APP

Manage your devices in one place. Conveniently request services.

Check It Out
Need assistance? We’re here to help!

Support for RoboMaster S1

View Manuals
Get Started
Service Request
Specs
Tutorial Videos
FAQ

Get Started

Other Downloads

Manuals and other applications.

Learn More

Service Request

Online Repair Request

Apply for online repair requests and ask for repair help.

Apply Now

My Device Information

Get to know the activation, service plan status, and eligibility to purchase DJI Care.

Check Now

Specs

RoboMaster S1

Camera

FOV 120°
Max Still Photo Resolution2560×1440
Max Video ResolutionFHD: 1080/30fps
HD: 720/30fps
Max Video Bitrate16 Mbps
Photo FormatJPEG
Video FormatMP4
SensorCMOS 1/4″; Effective pixels: 5 MP
Operating Temperature Range-10 to 40 °C (14 to 104 °F)

Narrow Infrared Units

Effective Range [1]6 m (in indoor lighting conditions)
Effective AreaVaries from 10° to 40°
Effective area decreases as distance from the target increases.

Wide Infrared Units

Effective Range [1]3 m (in indoor lighting conditions)
Effective Width360° (in indoor lighting conditions)

Hit Detector

Detection RequirementsFor the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°.
Maximum Detection Frequency15 Hz

S1

WeightApprox. 3.3 kg
Dimensions 320×240×270 mm (length × width × height)
Chassis Speed Range0-3.5 m/s (forward)
0-2.5 m/s (backward)
0-2.8 m/s (sideways)
Max Chassis Rotational Speed600°/s

M3508I Brushless Motor

Max Rotational Speed1000 rpm
Max Torque0.25N·m
Max Output Power 19 W
Operating Temperature Range-10 to 40 °C (14 to 104 °F)
DriverFOC
Control MethodClosed-loop speed control
ProtectionOvervoltage protection
Overtemperature protection
Soft-start
Short-circuit protection
Chip and sensor anomaly detection

Blaster

Controllable Launching Frequency1-8/s
Max Launching Frequency10/s
Initial Launching Speed Approx. 26 m/s
Average Load Approx. 430

Gimbal

Controllable RangePitch: -20° to +35°
Yaw: ±250°
Mechanical RangePitch: -24° to +41°
Yaw: ±270°
Max Rotational Speed540°/s
Vibration Control Precision (on the flat surface and with the Blaster idle)±0.02°

Intelligent Controller

Latency [2]Connection via Wi-Fi: 80-100ms
Connection via Router: 100-120ms
(unobstructed, free of interference)
Live View Quality720p/30fps
Max Live View Bitrate6 Mbps
Operating Frequency [3]2.4 GHz, 5.1 GHz, 5.8 GHz
Operating ModeConnection via Wi-Fi, Connection via Router
Max Transmission Distance [4]Connection via Wi-Fi:
FCC, 2.4 GHz 140 m，5.8 GHz 90 m
CE, 2.4 GHz 130 m，5.8 GHz 70 m
SRRC, 2.4 GHz 130 m，5.8 GHz 90 m
MIC, 2.4 GHz 130 m

Connection via Router:
FCC, 2.4 GHz 190 m，5.8 GHz 300 m
CE, 2.4 GHz 180 m，5.8 GHz 70 m
SRRC, 2.4 GHz 180 m，5.8 GHz 300 m
MIC,2.4 GHz 180 m
Transmission Power (EIRP)2.400-2.4835 GHz
FCC: ≤30 dBm
SRRC: ≤20 dBm
CE: ≤19 dBm
MIC: ≤20 dBm

5.150-5.250 GHz
FCC: ≤30 dBm
SRRC: ≤23 dBm
CE: ≤20 dBm
MIC: ≤23 dBm

5.725-5.850 GHz
FCC: ≤30dBm
SRRC: ≤30dBm
CE: ≤14 dBm
Transmission StandardIEEE802.11a/b/g/n

Intelligent Battery

Capacity2400 mAh
Nominal Charging Voltage10.8 V
Maximum Charging Voltage12.6 V
Battery TypeLiPo 3S
Energy25.92 Wh
Weight169 g
Operating Temperature Range-10 to 40 °C (14 to 104 °F)
Charging Temperature Range5 to 40 °C (41 to 104 °F)
Maximum Charging Power29 W
Battery Life in Use35 minutes (measured at a constant speed of 2 m/s on a flat surface)
Battery Life on StandbyApprox. 100 minutes

Charger

Input100-240 V, 50-60Hz, 1A
OutputPort: 12.6 V=0.8A or 12.6 V=2.2A
Voltage12.6 V
Rated Voltage28 W

Gel Bead

Diameter5.9-6.8 mm [2]
Weight0.12-0.17 g [2]

App

AppRoboMaster
iOSiOS 10.0.2 or later
Android Android 5.0 or later

Router

Recommended RoutersTP-Link TL-WDR8600; TP-Link TL-WDR5640 (China)
TP-Link Archer C7; NETGEAR X6S (International)
Recommended outdoor power supply solution for routersLaptop Power Bank (match the input power of the router)

microSD card

Supported SD Cards Supports microSD cards with a capacity up to 64GB

Others

Notes1. Use of the infrared units will be affected in outdoor or infrared-intensive environment.
2. Measured in an interference-free and unobstructed environment with a distance of approximately one meter between the mobile device, the router, and the S1. The iOS device used was an iPhone X. The results of testing with different Android device may be different.
3. Outdoor use of the 5.1 GHz and 5.8 GHz frequency bands is prohibited in some areas. Always follow all local laws and regulations in your country or region.
4. Measured in an interference-free and unobstructed environment. For Connection via Wi-Fi, the mobile device used for testing was a sixth-generation iPad (released in 2018). For Connection via Router, several router models were used for testing. FCC: TP-Link Archer C9; SRRC: TP-Link WDR8600; CE: TP-Link Archer C7; MIC: WSR-1160DHP3.
5. The gel beads will swell to a usable size after being soaked in water for four hours.

Tutorial Videos

DJI - RoboMaster S1- Items Checking and Assembly

DJI - RoboMaster S1- How to Connect the Robot to the App

DJI - RoboMaster S1- How to Use DIY Programming

DJI - RoboMaster - How to Update RoboMaster S1's Firmware

DJI - RoboMaster S1- How to Use Follow Mode on RoboMaster S1

DJI - RoboMaster S1 - First Time Use

DJI - RoboMaster S1- How to Use the RoboMaster App

DJI - RoboMaster S1- How to Use Solo Mode

DJI - RoboMaster S1- How to Program with Scratch

FAQ

Basic Operation
Basic Operation
Features
Features
Product Components, Accessories
Product Components, Accessories
Activation & Updating
Activation & Updating

Basic Operation

How can I control the RoboMaster S1?
The RoboMaster S1 can be operated using a computer or a smart device via the touchscreen and gamepad. When using the gamepad with a touchscreen device, the robot can also be operated using an external mouse, which can be connected through a dedicated USB port.
How can I connect to the RoboMaster S1?
Users can connect to the RoboMaster S1 via Wi-Fi or a router. When connecting via Wi-Fi, your mobile device or computer connects to the Wi-Fi of the S1. Connection via router provides broader signal coverage, which allows multiple control methods for robots to operate simultaneously on the same network.
When operating the S1 through a router, does the router need to be connected to the internet?
No.
What are the product requirements for the router?
1. The encryption mode of the router Wi-Fi needs to be wpa/wpa2-psk;
2. Make sure that the number of devices connected to router doesn’t reach the maximum value;
3. The router needs to allow communication among the linked devices;
4. The router connection does not need to do login confirmation twice.
What types of surfaces are okay for the RoboMaster S1 to operate on?
Flat surfaces such as wood, carpet, tile, and concrete are optimal for operating the S1. Users should avoid surfaces that are too smooth as the S1 wheels may have problems gaining enough traction for precise control. Surfaces with fine particles like sand or dirt should be avoided.
How long is the S1 battery life?
The battery of the S1 can last for 35 minutes of continuous use. This was measured with the S1 moving at a constant speed of 2.0m/s on a flat surface. The battery life on standby is about 100 minutes.
What is the maximum speed of the S1?
The maximum forward speed is 3.5m/s, the maximum backward speed is 2.5m/s, and the maximum speed when moving sideways is 2.8m/s.
What is the maximum transmission distance of the S1?
Connection via Wi-Fi:

FCC, 2.4 GHz 140 m, 5.8 GHz 90 m

CE, 2.4 GHz 130 m, 5.8 GHz 70 m

SRRC, 2.4 GHz 130 m, 5.8 GHz 90 m

MIC, 2.4 GHz 130 m
Connection via Router:

FCC, 2.4 GHz 190 m, 5.8 GHz 300 m

CE, 2.4 GHz 180 m, 5.8 GHz 70 m

SRRC, 2.4 GHz 180 m, 5.8 GHz 300 m

MIC, 2.4 GHz 180 m

* Note: These results were achieved in an environment without signal interference or blockages. Blocked signals or signal interference will influence the transmission distance and effect. It is recommended to keep the S1 antenna as vertical as possible during use for optimal image transmission.
For Connection via Wi-Fi, the mobile device used for testing was a sixth-generation iPad (released in 2018). For Connection via Router, several router models were used for testing. FCC: TP-Link Archer C9; SRRC: TP-Link WDR8600; CE: TP-Link Archer C7; MIC: WSR-1160DHP3.

What shooting methods does the S1 support?
The S1 supports two shooting methods: gel beads and infrared beams.
Is the Blaster safe?
The Blaster can shoot gel beads and infrared beams. The S1’s blasting function meets the safety requirements of major countries and regions around the world. The S1 has an additional angle limit protection to make sure that it cannot launch gel beads when the pitch angle is higher than 10 degrees. The infrared beams are also safe and cannot cause any physical damage.
Is RoboMaster S1 waterproof?
No.

Features

What programming languages does the S1 support?
Scratch and Python.
What programming platform does the S1 support?
The S1 only supports the official programming platform provided in the RoboMaster app known as RoboMaster Lab. This feature is available on mobile devices and computers. You can program, connect, and operate the S1 directly when using RoboMaster Lab.
I don’t know how to program. Can I still use the S1?
There are abundant teaching resources in the RoboMaster app, including project-based tutorials, video courses, programming guides, and more, that allow users without programming experience to get started quickly. There are also numerous features that users can enjoy that do not require programming knowledge, such as FPV driving and Battle mode.
How can I implement/use the programs that I write?
You can directly run your programs in RoboMaster Lab to see how they affect the S1. You can also set your program as a custom skill or Autonomous Program. Custom skills need to be selected using icons on the FPV interface as you control the robot in the app. Autonomous Programs are written into the robot itself and can be synced by pressing the Autonomous Program Button on the S1. You can also share your programs with others through the RoboMaster app.
What kinds of stimulus can the S1 recognize?
1.Clapping Recognition: the S1 can recognize two or three consecutive claps and be programmed to execute custom responses.
2.Gesture Recognition: the S1 can detect human gestures such as hand or arm signals and be programmed to execute custom responses.
3.S1 Robot Recognition: the S1 can detect other RoboMaster S1 units.
4.Vision Marker Recognition: the S1 can identify 44 kinds of official Vision Markers, which are comprised primarily of numbers, letters, and special characters. All of the files for these Vision Markers can be downloaded at insert web address.
5.Line Recognition: the S1 can detect and follow blue, red, and green tracks with a width of approximately 15-25 mm.
What modules or components can be controlled with custom programming?
Many parts of the S1 can be accessed and controlled through programming, including 7 motors, 6 hit detectors, 7 infrared sensors, 21 LED lights, 1 vision sensor, 1 microphone, 1 speaker, and 2 gyroscopes.
What is the effective detection distance of the S1 in Follow mode?
Follow mode is most effective when the subject is within a range of 1-3 meters from the S1.
Can the RoboMaster S1 record photos and videos?
With a microSD card inserted, the S1 can capture photos and record 1080p videos; without a microSD card, it supports only 720p.
Where are the photos taken by the RoboMaster S1 stored? How can I export them?
Photos taken by the S1 will be stored on the microSD card (when one is inserted). You can download them to your local device or share them directly to social media. For photos on the microSD card, you can remove the card and use an external device to export.
Do I need a microSD card to record and store video? Where are the videos taken by the RoboMaster S1 stored? How can I export them?
Users can record and store video using the RoboMaster app. However, if operating without a microSD card, 720p is the only resolution option. When using a microSD card, users can record in 1080p, although it should be noted that playback within the app will still be displayed in 720p. The 1080p version will be stored on the microSD card and can be exported using an external device.
How many S1 units can simultaneously participate during Battle mode?
A maximum of six S1 units can operate at the same time during Battle mode.
How are Hit Points (HP) and other game rules determined and enforced?
When you select Battle mode in the RoboMaster app, game rules and HP are detected and implemented with the S1 referee system, letting users enjoy a fair gaming experience.
What routers are recommended for multiplayer gameplay?
For Battle mode, it is recommended to use a router that supports 5GHz to reduce signal interference. If you use a router that only supports 2.4GHz, you are recommended to choose the 3x3 MIMO Router.
The following router brands and models are recommended:

TP-Link TL-WDR8600; TP-Link TL-WDR5640 (for users in China)

TP-Link Archer C7; NETGEAR X6S (for users outside of China)

Product Components, Accessories

What ports does the S1 have and what accessories does it support?
The S1 has six PWM ports, which support servos, LEDs, drivers, and more. For more information on supported accessories, please visit programming guide.
How do I charge the Intelligent Battery of the RoboMaster S1 and how long it will take?
You can charge the Intelligent Battery of the S1 with the official Intelligent Battery Charger. It takes about 90 minutes to fully charge.
How should I maintain the battery if it isn’t used for a long period of time?
It is recommended users charge and discharge their battery every three months to keep it active.
Are the gel beads made of safe material? What information do I need to know about using gel beads?
The gel beads for the RoboMaster S1 are made of safe, non-toxic gel that softens and expands when soaked in water. Please use them according to the instructions. At normal temperature, soak them in water for about four hours. The recommended proportion is 500 gel beads (about a full bottle top’s worth) per 1000ml of water. The gel beads will begin to evaporate and shrink shortly after they are removed from water, so it’s recommended to use them within 24 hours (in normal temperature and moisture conditions). You can also keep them into a sealed bottle to prolong the storage time. Both the product combo and PlayMore Kit come with gel beads. If you need more, they are available for purchase at the DJI Online Store.
What is the capacity of the gel bead container?
The gel bead container can hold approximately 430 gel beads.
How can I assemble the S1? Are there any tutorials or instructions?
Detailed assembly tutorial videos area available in the app and online. Users can also consult the official user manual for instructions. For more information, please check our tutorial videos.
What are the expandable interfaces of the RoboMaster S1?
The RoboMaster S1 has six PWM ports and one SBus port to support customization.
How can I use third-party accessories?
PWM Ports: Support accessories such as steering engines, LEDs, and drivers. The PWM-pulse-signal-based mechanical arm and claw can be controlled precisely through programming, which should be coded beforehand in the Lab section of the RoboMaster app. More details can be found in the programming guide: RoboMaster S1 website -> Programming Guide -> chassis-> set the output percentage for a PWM port.

SBus Port: The RoboMaster S1 can be controlled by receiver, which supports standard SBus protocols such as a 6303SB receiver and a FUTABA controller. It is also possible to connect the S1 with external development boards and control the S1 by a program written via SBus protocol.
Where can I buy third-party accessories for the S1?
Accessories that support PWM and SBus ports are available on most popular shopping websites.

Activation & Updating

How do I activate the RoboMaster S1?
When you connect your RoboMaster S1 to the RoboMaster app for the first time, the activation prompt will pop up automatically. Follow the activation instructions in the app.
How do I upgrade the firmware?
Download the latest firmware in the RoboMaster app and upgrade according to the instructions.
What should I do if my RoboMaster S1 becomes disconnected with the app while the firmware is updating?
1.When disconnected during the transmission of a firmware kit, repeat the update.
2.When disconnected during the updating process, the update will not be influenced because the app does not participate in the updating process. LED and voice alerts on the RoboMaster S1 will keep users informed of the update status.
What should I do if the firmware versions of any replaced accessories are not compatible with the existing S1 firmware?
Users will be notified of any inconsistencies in firmware. Update firmware according to instructions.
What can cause a firmware update failure?
1.A firmware update will fail if you power off the device during the updating process.
2.A firmware update will fail if the internet is disconnected while the firmware kit is being downloaded.
Note: During the updating process, it is normal for the app to disconnect from the RoboMaster S1, which will not affect the update. You can reconnect the app to the S1 after the update is completed.

Search for More Information

Contact Us

Online Customer Service

Monday - Sunday: 6:00 - 18:00 (PST/PDT)

Contact Online Customer Service

Hotline Service

English: +1 818 235 0789
Monday - Sunday: 6:00 - 18:00 (PST/PDT)

Phone Support Options

DJI Community

Connect with DJI enthusiasts to explore various product experiences

Join DJI Community