FAQ

Osmo Action 5 Pro features a next-gen 1/1.3-inch CMOS sensor, upgraded front and rear OLED high-brightness touchscreens, support for Wi-Fi 6.0 high-speed transfer, 47GB of built-in storage, and 4 hours* of extended battery life. Additionally, it introduces Subject Tracking mode and SuperNight mode. For other differences, refer to the model comparison page.

^{* Measured under laboratory conditions at 25° C, while recording 1080p/24fps (16:9) video, with RockSteady on, Wi-Fi off, and screens off. Data was collected in a controlled environment and should be taken as reference only. When activating and using Osmo Action 5 Pro in the EU and the UK, actual battery life may vary due to local regulations on product operating temperatures. Refer to the actual user experience.}

Osmo Action 5 Pro is equipped with a next-gen 1/1.3-inch CMOS sensor, which offers an enhanced dynamic range of up to 13.5 stops. It supports up to 4K/60fps high-dynamic low-light imaging and 4K/120fps 4:3 video recording.

Osmo Action 5 Pro supports the following resolution settings:
4K (4:3): 3840×2880@100/120fps
4K (4:3): 3840×2880@24/25/30/48/50/60fps
4K (16:9): 3840×2160@100/120fps
4K (16:9): 3840×2160@24/25/30/48/50/60fps
2.7K (4:3): 2688×2016@100/120fps
2.7K (4:3): 2688×2016@24/25/30/48/50/60fps
2.7K (16:9): 2688×1512@100/120fps
2.7K (16:9): 2688×1512@24/25/30/48/50/60fps
1080p (16:9): 1920×1080@100/120/200/240fps
1080p (16:9): 1920×1080@24/25/30/48/50/60fps

MP4 (HEVC).

Yes. On the recording specifications page, tap the RS|Wide icon in the upper right corner to switch the FOV to Standard (Dewarp).

Yes. Photos from Timelapse can be downloaded and viewed on a computer.

Osmo Action 5 Pro uses RockSteady 3.0 technology to stabilize footage. This Electronic Image Stabilization (EIS) technology is realized by increasing the shutter speed, analyzing the images captured by the CMOS sensor, and compensating by cutting off the edges of these images. In this way, multiple frames are overlaid and finally combined into a single frame that is sharp, clear, and accurately exposed.

HorizonSteady uses DJI's latest stabilization algorithm to correct shakes for any horizontal rotation (360°) and lock onto a leveled horizon in every frame, regardless of how the camera is mounted or worn. It allows you to capture smooth and stable footage whether you are cycling on bumpy roads or go-karting around a track.

HorizonSteady supports 1080p@24/25/30/48/50/60fps and 2.7K (16:9)@24/25/30/48/50/60fps.

HorizonBalancing supports 1080p@24/25/30/48/50/60fps, 2.7K (16:9)@24/25/30/48/50/60fps, and 4K (16:9)@24/25/30/48/50/60fps.

Yes. Osmo Action 5 Pro supports shooting up to 1080p/240fps 8x slow-motion videos.

D-Log M is designed to capture a wide dynamic range from the sensor, and colors are distributed evenly so the bright and dark parts of the video have greater fidelity and clarity. It is not a LUT, but a lower-contrast video with a flat color profile, which is great for expanding post-processing options.

There are three exporting options available:
1. Connect to the DJI Mimo app and download content from the microSD card and built-in storage to your smartphone.
2. Use a card reader to export content from the microSD card to your computer or smartphone.
3. Swipe down from the camera view, tap the Settings icon, and select OTG Connection. Follow the on-screen prompts to connect the camera to a computer or smartphone with a Type-C port using a Type-C cable. You can then export content from the microSD card and built-in storage.

The footage is saved either on the microSD card inserted into the camera body or in the camera's built-in storage.

Yes. Osmo Action 5 Pro uses a prime lens, and subjects are clear when they are at least 350 mm or more from the lens.

Osmo Action 5 Pro supports evaluative metering but not spot metering.

Videos recorded by Osmo Action 5 Pro have a high dynamic range, making an HDR mode unnecessary.

The color temperature sensor of Osmo Action 5 Pro is built into the letter "O" of the logo on the front of the camera. Do not cover it during use. With the color temperature sensor, Osmo Action 5 Pro delivers outstanding color temperature performance even in scenarios with complex lighting, such as diving. The sensor corrects color temperature when filming underwater and reduces color temperature flicker due to the change of shooting angle. It can also detect and reduce light flickering more accurately.

SuperNight mode supports shooting at 1080p (16:9)@24/25/30/48/50/60fps, 2.7K (16:9)@24/25/30fps, and 4K (16:9)@24/25/30fps. You can enable RockSteady 3.0 or RockSteady 3.0+, and choose between standard or wide FOV. It is recommended to use this mode in darker urban night scenes. For city nights with basic lighting, standard video mode will suffice.

Subject Tracking mode keeps the subject centered in the frame and continuously track them, making it ideal for capturing various tracking scenarios like skiing/snowboarding and cycling/motorcycling. This mode is not suitable for tracking pets or other non-human subjects.

When using Subject Tracking mode, a gray frame will appear in the center of the camera view. When a person is centered in the camera view, they will be prioritized as the tracking subject and a yellow box appears, indicating that the subject has been selected. Press the shutter/record button to start recording, and the yellow box will turn green, indicating that the subject is locked and tracking has begun. As the subject moves, the gray frame will move accordingly, helping the user maintain a consistent shot. If the tracking subject is lost, the green box will turn red. If the subject remains lost for more than 10 seconds, even if they re-enter the camera view, tracking will not resume automatically, and the gray frame will reset to the center. To restart Subject Tracking, you need to re-lock the subject and start recording again.

The DJI Mimo app. It allows you to adjust settings and shooting modes, sync photos and videos, and edit and share your content.

You can follow the steps below to activate the device:
1. Download the DJI Mimo app by scanning the QR code shown on the camera screen prompt or from your smartphone's app store.
2. Press and hold the quick switch button to power on Osmo Action 5 Pro.
3. Launch the DJI Mimo app, tap the Camera icon, enable Bluetooth and Wi-Fi on your smartphone, and connect to Osmo Action 5 Pro.
4. After connecting Osmo Action 5 Pro to the DJI Mimo app, you will be prompted to activate the device.
5. Complete the activation by following the prompts in the app.

The DJI Mimo app will send firmware push messages automatically. Follow the prompts to complete the update.

Swipe up from the bottom of a screen to unlock it and switch to that screen. Through the camera menu, users can opt to display the front and rear screens simultaneously or to use just one screen.

Yes. You can control parameter settings, mode switching, video playback, and more.

Hold the camera in a vertical orientation, or attach the Horizontal-Vertical Protective Frame along with other accessories to the camera to switch between horizontal and vertical shooting.

Yes. Osmo Action 5 Pro supports voice commands in English and Mandarin Chinese. It is recommended to use voice control within one meter from the camera in a relatively quiet environment.
English commands:
Start Recording
Stop Recording
Take Photo
Shut Down

After shooting a video with Osmo Action 5 Pro and the selfie stick, you can connect it to the DJI Mimo app to eliminate the selfie stick*. For details, refer to the tutorial video.

^{* To ensure the elimination effect works adequately, use the Osmo 1.5m Extension Rod when shooting and try to avoid covering any of your body with it. InvisiStick supports up to 1920×1080 video when eliminating on the cloud, and up to 1280×720 video when eliminating locally.}

You can save the video to your smartphone and share it, or use the DJI Mimo app to upload it and share the link generated.

1. On Osmo Action 5 Pro's camera view, tap the Image/Audio Settings icon on the right side, enable PRO mode in the upper right corner, and set Exposure to M (Manual) mode to adjust shutter speed and ISO parameters.
2. In the DJI Mimo app, tap the "..." icon on the camera view and enable PRO mode. Then, return to the camera view and tap the Image/Audio Settings icon to adjust shutter speed and ISO parameters.

Yes. When Osmo Action 5 Pro is powered on, press and hold the quick switch button to enter sleep mode. To wake it up, press the quick switch button once. Additionally, pressing the shutter/record button once will enable the Snapshot feature.

When Osmo Action 5 Pro is powered off, press and hold the shutter/record button to start recording immediately. The shooting mode will follow the settings of the SnapShot feature, allowing you to quickly capture exciting moments. After shooting, if there is no operation within 3 seconds, the camera will automatically power off.

Yes. You can connect Osmo Action 5 Pro with a third-party microphone via a universal 3.5mm Type-C cable.

Yes. Tap the Volume icon in the upper right corner of the playback page to turn the sound on or off. Press and hold the icon to adjust the volume.

On the camera view, swipe down to enter the menu, tap the Settings icon, and select Depth & Altitude. In the Diving menu, enable Auto Record, and the camera will automatically start recording at a depth of 1 meter underwater and display the diving depth and duration. In the Hiking & Parachuting menu, enable Altitude Display and set Min Altitude Display to Always, and the camera view will display the current altitude in real-time.

In standard video mode, record at 1080p@100/120/240fps or 2.7K/4K (16:9)@100/120fps. Then, apply 4x frame interpolation to achieve up to 1080p/960fps, thus creating 32x super slow-motion video (from 1080p/240fps to 1080p/960fps).

^{This feature does not require switching to Slow Motion mode. You can simply shoot in standard video mode. During playback, if the video is longer than 3 seconds, tap the Snail icon at any moment you want to apply in-camera slow motion processing to, and save a super slow-motion version of the original footage.}

The max operating time of Osmo Action 5 Pro is 4 hours*, and up to 3.6 hours** when shooting in environments with temperatures as low as -20° C.

^{* Measured under laboratory conditions at 25° C, while recording 1080p/24fps (16:9) video, with RockSteady on, Wi-Fi off, and screens off. Data was collected in a controlled environment and should be taken as reference only. When activating and using Osmo Action 5 Pro in the EU and the UK, actual battery life may vary due to local regulations on product operating temperatures. Refer to the actual user experience.
** Measured under laboratory conditions at -20° C, while recording 1080p/24fps (16:9) video, with RockSteady on, Wi-Fi off, and screens off. Data was collected in a controlled environment and should be taken as reference only.}

Yes. You can use the DJI 30W USB-C Charger* to fast charge Osmo Action 5 Pro.

^{* The DJI 30W USB-C Charger is sold separately.}

Yes. However, Subject Tracking mode and SuperNight mode are only functional when the camera is equipped with a battery. Other modes can be used without a battery, as long as the camera is connected to a power source via a Type-C cable.

DJI has designed a range of accessories to use Osmo Action 5 Pro within various scenarios. Check the Accessories section on the product page for more details.

Please check the accessory compatibility page for more details.

1. Official accessories can be attached directly to Osmo Action 5 Pro via the quick-release locking clips.
2. Attach a tripod and other accessories with the Osmo Magnetic Ball-Joint Adapter Mount or via the 1/4″ screw hole on the bottom of the Osmo 1.5m Extension Rod.

Yes. You can mount third-party action camera accessories with the Quick-Release Adapter Mount.

You can mount a tripod using the Osmo Magnetic Ball-Joint Adapter Mount or the 1/4″ screw hole on the bottom of the Osmo 1.5m Extension Rod. Additionally, you can use the Osmo Action Multifunctional Charging Handle, which comes with a built-in tripod.

No. The Flat Adhesive Base uses 3M adhesives that are not reusable.

For details, please refer to the tutorial video.

Playback of recorded footage on computers can be affected by computer settings and performance. If flicker occurs, try the following solutions:
Apple Mac: Go to System Preferences > Displays > Refresh Rate, and change the refresh rate to a fixed value, instead of ProMotion.
Other computers: A low-performance graphics card may cause flicker when playing the files. It is recommended to use a better-performing computer for viewing.

With the Osmo Action GPS Bluetooth Remote Controller, you can record GPS information and add sports data to your video in the DJI Mimo app.

When using high-specification, high-performance modes (such as 4K/120fps standard video mode, 2.7K/60fps Subject Tracking mode, or 4K/30fps SuperNight mode), the camera consumes more power, which can result in a noticeable increase in temperature. Additionally, extended recording sessions or prolonged handheld use can also cause the camera to feel warm.

No.

Yes.

Yes. Osmo Action 5 Pro can be used at depths of up to 20 meters without a case and up to 60 meters by using the Waterproof Case.

^{Before use, close the battery compartment cover and the USB-C port cover, and tighten the Glass Lens Cover. It is recommended to install the Waterproof Case for long-duration underwater shooting or in environments with high water impact pressure. Osmo Action 5 Pro and its Waterproof Case have an IP68 waterproof rating. Do not use the camera in hot springs or extreme underwater environments, or let it come into contact with corrosive or unknown liquids.}

1. Check that the Glass Lens Cover and screens are intact. Close the battery compartment cover and the USB-C port cover, and tighten the Glass Lens Cover.
2. Osmo Action 5 Pro can be used at depths of up to 20 meters. However, it is recommended to install the Waterproof Case for long-duration underwater shooting or in environments with high water impact pressure. With the Waterproof Case, Osmo Action 5 Pro can be used at depths of up to 60 meters.
3. Do not use the camera in hot springs or extreme underwater environments, or let it come into contact with corrosive or unknown liquids.
4. Before changing the Glass Lens Cover, air dry the camera to avoid any condensation caused by water entering the lens cap.
5. Rinse the camera with clean water after using it underwater, and completely air dry it before using it again.

Recommended Models:
SanDisk Extreme PRO 32GB U3 A1 V30 microSDHC
Kingston CANVAS Go! Plus 64GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 128GB U3 A2 V30 microSDXC
Kingston CANVAS React Plus 64GB U3 A1 V90 microSDXC
Kingston CANVAS React Plus 128GB U3 A1 V90 microSDXC
Kingston CANVAS React Plus 256GB U3 A1 V90 microSDXC
Lexar Professional 1066x 64GB U3 A2 V30 microSDXC
Lexar Professional 1066x 128GB U3 A2 V30 microSDXC
Lexar Professional 1066x 256GB U3 A2 V30 microSDXC
Lexar Professional 1066x 512GB U3 A2 V30 microSDXC
Kingston Canvas Go! Plus 1T U3 A2 V30 microSDXC

1. Dirt on the lens can be cleaned with a lens cleaning cloth. For dust in the crease at the edge of the lens, use a dust blower or cotton swab for cleaning.
2. To clean water stains, oil smudges, or fingerprints on the lens, apply a few drops of lens cleaning solution on lens tissues and use a circular motion to wipe away.

Osmo Action 5 Pro is dust-proof. However, if dust does get inside the device and cannot be cleaned, please contact DJI After-Sales for repair.