FAQ

Camera
Osmo Action 3 supports the following resolution settings:
4K (4:3): 4096×3072@24/25/30/48/50/60fps
4K (16:9): 3840×2160@100/120fps
4K (16:9): 3840×2160@24/25/30/48/50/60fps
2.7K (4:3): 2688×2016@24/25/30/48/50/60fps
2.7K (16:9): 2688×1512@100/120fps
2.7K (16:9): 2688×1512@24/25/30/48/50/60fps
1080p (16:9): 1920×1080@100/120/200/240fps
1080p (16:9): 1920×1080@24/25/30/48/50/60fps
MP4 (H.264/HEVC).
Yes. You can switch the FOV to Standard (Dewarp) on the video and audio parameter settings page on the right side of the camera view.
Yes. Photos from Timelapse can be downloaded and viewed on a computer.
Osmo Action 3 uses RockSteady 3.0 technology to stabilize footage. This Electronic Image Stabilization (EIS) technology is realized by increasing the shutter speed, analyzing the images captured by the CMOS sensor, and compensating by cutting off the edges of these images. In this way, multiple frames are overlaid and finally combined into a single frame that is sharp, clear, and accurately exposed.
HorizonSteady uses DJI's latest stabilization algorithm to correct shakes for any horizontal rotation (360°) and lock onto a leveled horizon in every frame, regardless of how the camera is mounted or worn. It allows you to capture smooth and stable footage whether you are cycling on bumpy roads or go-karting around a track.
Yes. Osmo Action 3 supports up to 1080p/240fps 8x slow-motion videos.
It is designed to capture a wide dynamic range from the sensor, and colors are distributed evenly so the dark parts of a picture are greatly improved. It is not a real LUT, but a lower-contrast video with a flat color profile, great for expanding your post-processing options.
There are three exporting options available:
1. Connect to the DJI Mimo app and download the content to your smartphone.
2. Insert the microSD card from Osmo Action 3 into a computer.
3. Connect Osmo Action 3 to a computer with a Type-C cable.
The footage is saved to the microSD card inserted into Osmo Action 3.
Yes. Osmo Action 3 uses a prime lens and subjects are clear when they are at least 300 mm or more from the lens.
Osmo Action 3 supports evaluative metering but not spot metering.
Operation
The DJI Mimo app. It allows you to control Osmo Action 3, sync photos and videos, edit, and share.
You can follow the steps below to activate the device:
1. Download the DJI Mimo app by scanning the QR code shown on the camera screen prompt or from an app store.
2. Press and hold the Quick Switch button to power on Osmo Action 3.
3. Launch the DJI Mimo app, tap the camera icon on the upper left corner of the home screen, enable Bluetooth and Wi-Fi on your smartphone, and connect to Osmo Action 3.
4. After connecting Osmo Action 3 to the DJI Mimo app, you will be prompted to activate the device.
5. Complete the activation by following the prompts on the app.
The DJI Mimo app will send push messages automatically. Follow the prompts to complete the update.
Swipe up from the bottom of a screen to unlock it and switch to that screen. Through the camera menu, users can opt to display the front and rear screens simultaneously, or to use just one screen.
Yes. You can perform parameter settings, mode switch, video playback, etc.
Mount the Horizontal-Vertical Protective Frame and use with the Adhesive Base Kit or 1.5m Extension Rod Kit to switch between horizontal and vertical shooting.
Yes. Osmo Action 3 supports voice commands in English and Mandarin Chinese.
The lock screen function prevents you from touching the screen accidentally, especially when you use it underwater.
After shooting a skiing video with Osmo Action 3, you can connect it to the DJI Mimo app to eliminate the selfie stick.* For details, refer to the tutorial video.

* To ensure the elimination effect works adequately, use the Osmo 1.5m Extension Rod when shooting and try to avoid covering any of your body parts with it.
You can save the video to your smartphone and share it, or use the DJI Mimo app to upload it and share the link generated.
1. On the right side of the camera view, tap the icon for adjusting image and audio parameters, enable PRO mode on the upper right corner, then select M mode to adjust shutter speed, ISO, and other camera parameters manually.
2. Launch the DJI Mimo app, enable PRO mode on the upper left corner of the main page, then tap Settings on the top to adjust shutter speed, ISO, and other camera parameters manually.
Yes. When Osmo Action 3 is powered on, press and hold the Quick Switch button to enter sleep mode. Press the button once to wake the screen. Press the shutter/record button to enable SnapShot.
Yes. You can connect Osmo Action 3 with a third-party microphone via the universal 3.5mm Type-C cable.
Yes. Tap the volume icon in the upper right corner of the playback page to turn the sound on or off. Press and hold the icon to adjust the volume.
Battery
The max operating time of Osmo Action 3 is 160 minutes in room-temperature environments, and up to 150 minutes when shooting in environments with temperatures as low as -20° C (-4° F).*

* Tested in a laboratory environment while recording 1080p/30fps video with EIS disabled and the screens off, and should be used for reference only.
Yes. You can use the DJI 30W USB-C Charger* to fast charge Osmo Action 3.

* The DJI 30W USB-C Charger is sold separately.
Accessories
Osmo Action 3 is compatible with the following accessories: Extreme Battery, Horizontal-Vertical Protective Frame, Rubber Lens Protector, Quick-Release Adapter Mount, Flat Adhesive Base, Locking Screw, Type-C to Type-C PD Cable, Multifunctional Battery Case, 1.5m Extension Rod, Waterproof Case, Adhesive Base Kit, Lens Protective Cover, 1.5m Extension Rod Kit, Magnetic Ball-Joint Adapter Mount, Floating Handle, 30W USB-C Charger, Biking Accessory Kit, Chest Strap Mount, Handlebar Mount, Diving Accessory Kit, Suction Cup Mount, Helmet Chin Mount, and Surfing Tethers.
1. Official accessories can be attached directly to Osmo Action 3 via the quick-release locking clip.
2. Attach a tripod and other accessories with the Magnetic Ball-Joint Adapter Mount or via the 1/4" screw hole on the bottom of the 1.5m Extension Rod.
3. Mount third-party action camera accessories with the quick-release adapter mount.
Yes. Osmo Action 3 can be mounted to a tripod with the Magnetic Ball-Joint Adapter Mount or via the 1/4" screw hole on the bottom of the 1.5m Extension Rod.
Yes. You can mount third-party action camera accessories with the quick-release adapter mount.
Based on the magnetic design, the magnetic force is strengthened and an additional positioning clip is added to enhance the impact resistance. *

* Do not throw, strike, or crush this product.
No. The Flat Adhesive Base uses 3M adhesives that are not reusable.
Other
Osmo Action 3 supports recording of 4K/120fps videos, during which it requires high power to run. As a result, after shooting high-specification videos for long durations, users can feel the heat when holding the camera.
No.
Yes.
Yes. Osmo Action 3 can be used at depths of up to 16 meters, and up to 60 meters when used with the Waterproof Case.
1. Check that the Lens Protective Cover and screens are intact. Close the battery compartment cover and the USB-C port cover, and tighten the Lens Protective Cover.
2. Osmo Action 3 can be used at depths of up to 16 meters. However, it is recommended to install the Waterproof Case for long-duration underwater shooting or when shooting in environments with high pressure or water impacts. With the Waterproof Case, Osmo Action 3 can be used at depths of up to 60 meters.
3. Do not use the camera in hot springs or expose it to corrosive liquids.
4. Before changing the Lens Protective Cover, air dry the camera to avoid any condensation caused by water entering the lens cap.
5. Rinse the camera with clean water after using underwater, and completely air dry it before using it again.
Recommended models:
SanDisk Extreme 32GB V30 A2 UHS-I Speed Grade 3
SanDisk Extreme Pro 32GB V30 A2 UHS-I Speed Grade 3
Kingston Canvas Go!Plus 64GB UHS-I Speed Grade 3
Kingston Canvas Go!Plus 128GB UHS-I Speed Grade 3
Kingston Canvas React Plus 64GB UHS-II Speed Grade 3
Kingston Canvas React Plus 128GB UHS-II Speed Grade 3
Kingston Canvas React Plus 256GB UHS-II Speed Grade 3
1. Dirt on the lens can be cleaned with a lens cleaning cloth. For dust in the cracks at the edge of the lens, use a dust blower or cotton swab for cleaning.
2. To clean water stains, oil smudges, or fingerprints on the lens, apply a few drops of lens cleaning solution on lens tissues and use a circular motion to wipe.
Osmo Action 3 is dust-proof. However, if dust does get inside the device and cannot be cleaned, please contact DJI After-Sales for repair.
LightCut App
LightCut is a video editing application recommended by DJI. It provides intuitive shooting and editing functions for DJI users, including AI-based one-tap editing, diverse exclusive video templates, inspirational creative tutorials, and many other resources that let you edit and generate videos effortlessly wherever you go. Click here to learn more.
You can download the LightCut app on major app stores, or from the Downloads page on the DJI official website. Click here to download. 
1. Make sure your Osmo Action 3 is activated and powered on, and then enable Bluetooth and Wi-Fi on your smartphone.
2. Launch LightCut, and then tap the device icon on the top.
3. Select your device ID and tap Connect. Check the device verification code and tap Accept. After a prompt asking you to join the Wi-Fi network pops up, tap to join.*

* During the connecting process, do not exit the app. For ensuing uses, make sure Osmo Action 3 is powered on, enable Bluetooth and Wi-Fi on your smartphone, and Osmo Action 3 will automatically connect to LightCut.
1. The LightCut app provides numerous templates that fit typical scenarios of the Osmo Action series. After connection, you can easily preview the footage without outputting it, allowing you to edit easily and generate videos efficiently.
2. One-Tap Editing will automatically recommend templates according to your selected clips and intelligently select clips to generate a short video with no manual editing required.
3. You can customize the editing, music, text, stickers, speed, filter (underwater color tuning is supported), and more for more flexibility and creative freedom.
Place your smartphone closer to Osmo Action 3 and try again.
iOS: Launch LightCut, and then view connected devices in My Device. Swipe left across the device and then remove the device.
Android: Launch LightCut, and then view connected devices in My Device. Press and hold the device and then remove it.
Make sure both your smartphone and Osmo Action 3 are powered on. Put the two devices close to each other, and make sure you have enabled Bluetooth on your smartphone and authorized LightCut. Then, try searching for the device again. If the device still cannot be found, reset the device.
Try the following:
1. Make sure you have enabled Bluetooth and Wi-Fi on your smartphone.
2. Restart Osmo Action 3 and the LightCut app, and try connecting again.
3. If the Wi-Fi password of Osmo Action 3 has been changed, turn off your smartphone's Wi-Fi and turn it on again, and then try connecting again.
Launch LightCut, enter One-Tap Editing, and select the videos you have shot. One-Tap Editing will automatically recommend templates according to your videos, which are optimized for many scenarios, including nature, city, home, retail location, food, pets, festivals, and more, and will intelligently select clips and generate a short video with no manual editing required.
You can also try other templates, change the selected clips, or select music, filters, text, and stickers. Effortless editing allows you to share great videos fast.
No. Download the DJI Mimo app for activation and firmware update.
We Value Your Privacy
We use cookies to personalize and enhance your browsing experience on our websites. You can manage your settings at any time through Cookie Preferences or read our Cookie Policy to learn more.
Cookie Preferences
Cookies are small files which, when placed on your device, enable us to provide certain features and functionality of DJI websites and online services to you. We use the following types of cookies on our websites. View Cookie Policy for full details.