Support for DJI Mic 2

33 N.
^{DJI Mic 2 uses multi-pole magnetization and has enough strength to lift an iron block weighing up to 3.3 kg.}

It is recommended to keep the DJI Mic 2 Clip Magnet away from bank cards, pacemakers, RAM chips, and hard discs.

1. DO NOT use when wearing heavy clothes (sweaters, down jackets, etc.). The transmitters could fall off due to lack of magnetism.
2. Use with caution during vigorous exercise, for example, jumping, sprinting, etc.

It is recommended to use the back clip of the DJI Mic 2 transmitter to secure it to places like your collar, or you can mount the transmitter using the DJI Mic 2 Clip Magnet.

Omnidirectional.

1. Transmitters connecting to the receiver via a 2.4G frequency band.
2. Bluetooth mode.

1. It depends on the compatibility of the livestreaming app and the mobile phone operating system. You can test it with Bluetooth earphones or headsets. If you cannot record audio with the earphones or headset for livestreaming, the transmitter does not support this function when connecting to a mobile phone via Bluetooth.

2. To connect, power on the transmitter, press and hold the record button for three seconds to switch the transmitter to Bluetooth connection mode, and enable Bluetooth on your mobile phone. Press and hold the linking button for two seconds and the mobile phone will automatically search for available Bluetooth devices. Select DJI Mic 2 when it appears to complete linking. Certain mobile phones will prompt a Bluetooth pairing request. Confirm the access to complete the linking. When the transmitter's status indicator turns solid blue, the linking is completed. If the mobile phone's Bluetooth cannot find DJI Mic 2, reboot Bluetooth on the mobile phone and link again.

DJI Mic 2 transmitters each have 8GB of built-in storage that can record 24-bit audio for up to 14 hours or 32-bit audio for up to 11 hours. Transmitters do not support external storage.

During internal recording, a file is saved every 30 minutes. When 32-bit float recording is enabled, a file is saved every 23 minutes, and the files are in WAV format. Recorded files can be exported by connecting the transmitter to a computer using the included USB cable.

Connect the transmitter(s) to your computer and delete the files you wish to remove.
You can also format the transmitters using the receiver.
When the storage space of the DJI Mic 2 transmitters runs out, the recording will stop.

The DJI Mic 2 transmitter currently only supports Bluetooth connection with Osmo Action 4, Osmo Pocket 3, and smartphones. Osmo Action 4 and smartphones can connect to one transmitter via Bluetooth at a time, while Osmo Pocket 3 can connect to two transmitters via Bluetooth at the same time.
When the DJI Mic 2 transmitter is connected to a smartphone via Bluetooth, intelligent noise cancelling and internal recording cannot be used.

It can link with up to two DJI Mic 2 transmitters at the same time.

No.

Link the DJI Mic 2 receiver and transmitters, plug a 3.5mm jack earphone/headset into the black 3.5mm monitoring port of the DJI Mic 2 receiver for monitoring. Monitoring volume can be adjusted during monitoring by swiping down on the main screen of the DJI Mic 2 receiver then entering Receiver Settings, swiping left, and tapping the monitoring volume icon to make adjustments.

Yes. You can lock the receiver screen by pressing the power button once. The screen will prompt "Screen locked." To unlock for touch control, press the power button again. When navigating in sub-menus, you can also return to the main interface by pressing the power button once.

You can play back recorded audio on a mobile phone without removing the receiver.

Yes. When the DJI Mic 2 receiver is connected to your phone via mobile phone adapter, you can use a charging cable to charge both the mobile phone and the receiver through the receiver's USB-C port.

Yes.

The DJI Mic 2 receiver's OUT port outputs analog signals for camera connections.
The DJI Mic 2 Mobile Phone Adapter (USB-C and Lightning) and USB-C ports output digital signals.

When the DJI Mic 2 receiver is connected to a camera via 3.5mm TRS cable, you can enable this function and the receiver automatically powers on and off in sync with the camera. When the camera is powered off or audio recording is not enabled during filming, the receiver will automatically power off. When the camera is powered on, the receiver will automatically power on.
To enable this feature, swipe down on the DJI Mic 2 receiver's main screen, enter Receiver Settings, swipe left, tap Power On/Off with Camera Simultaneously, and select ON.

Swipe down on the receiver's main screen to find Receiver Settings, then swipe left to find Recommended Camera Settings. Select the brand and camera model, and adjust the camera gain to the recommended gain. For more details, refer to the Instructions on Recommended Gain for Camera Setup. Connect the receiver to the camera's microphone port using a 3.5mm TRS cable, and the receiver's screen will display the current camera model in the upper left corner. If your camera is not listed in the recommended settings, choose None for the camera brand and adjust the receiver's gain based on audio monitoring.

The unique rotating design allows for flexible recording, while its cable routing design prevents accidental unplugging. Compact and easily concealable, it is ideal for interviews, vlogs, livestreaming, and more.

Yes.