FAQ

DJI Pocket 2 is a comprehensive upgrade to Osmo Pocket. Major upgraded features include:
1. The camera hardware is significantly upgraded with wider FOV and better image quality when shooting landscapes and portraits.
2. Consisting of four microphones, the new DJI Matrix Stereo feature supports stereo recording, SoundTrack, wind noise reduction, and more to create immersive audio, as if you were transported back to the moment.
3. Intelligent features like AI Editor make creating an expertly edited video easy and even automatic.
4. As a pocket-sized vlog solution, DJI Pocket 2 offers a wide range of accessories, such as the Do-It-All Handle, Wireless Microphone, Micro Tripod, and Mini Control Stick.

DJI Pocket 2 comes with a Mini Control Stick, and a tripod mount. The DJI Pocket 2 Creator Combo adds more accessories such as the DJI Pocket 2 Do-It-All Handle, Wireless Microphone, Wide-Angle Lens, Micro Tripod, and more.

1. Download the DJI Mimo app and log in with your DJI account.
2. Remove the cover of the universal port, connect Pocket 2 to your phone with the smartphone adapter, and press and hold the power button or function button to power on.
3. Activation prompt will be shown automatically in DJI Mimo after the first connection.
4. Follow the in-app instructions to complete activation.
You can also refer to the tutorial below: DJI Pocket 2 Unboxing

10 cm for photos and 20 cm for videos.

Single Shot, Pano, Timelapse, Motionlapse, Hyperlapse, Slow Motion (1080p @ 120/240fps), HDR Video, Story Mode.

When shooting photos, videos, or slow-motion video, ActiveTrack and FaceTrack can be enabled in the following ways:
1. Via Pocket 2: Tap the touchscreen to enable ActiveTrack. FaceTrack will be enabled if a face is detected and automatically enabled if the camera is facing the user.
2. Via DJI Mimo app: Drag a box around your subject in the camera view and start tracking.
Press the function button or tap on the touchscreen to exit ActiveTrack.
Note: ActiveTrack is disabled in the following scenarios: In FPV mode, shooting 4K/60fps video, shooting 4K @ 48/50/60fps video while wirelessly connected to DJI Mimo, shooting High Quality video at 4K/30fps, and shooting 8x slow motion.

1. To enter portrait mode, hold the gimbal upright and turn it 90° to the left or right.
2. To enter underslung mode, hold the gimbal upright and turn it 180° to the left or right.

For photos: Exposure, white balance, format (JPEG, RAW), focus (single, continuous);
For video: Exposure, white balance, color (normal, D-Cinelike), focus (single, continuous), channel (mono, stereo), volume, wind noise reduction;
In Timelapse mode: Exposure, white balance, format (video. video+JPEG, video+RAW), frame rate (24/25/30fps), focus (single, continuous);

1. Via DJI Pocket 2: Swipe up on the touchscreen, then select Fast Follow or Slow Follow.
2. Via DJI Mimo: Tap the gimbal setting icon on the right side of the screen, and then select Fast Follow or Slow Follow.

1. Via DJI Pocket 2: Swipe up on the touchscreen, then select Tilt Locked.
2. Via DJI Mimo: Tap the gimbal setting icon on the right side of the screen, and then select Tilt Locked.

1. Via DJI Pocket 2: Swipe down on the screen to enter Settings. Tap “Tilt Control,” and then you can control the tilt axis on the home page by scrolling up and down on the right side of the screen;
2. Via DJI Mimo: Access Camera View in the app. Use the virtual joystick on the right side of the screen to control the pan and tilt axes.
3. Via DJI Pocket 2 Mini Control Stick: Use the Mini Control Stick to control the tilt and pan axes of DJI Pocket 2.

In Gimbal Locked mode, the camera does not move at all, no matter how the handle moves. Press and hold the function button, and a lock icon will appear on the top right corner of the touchscreen, indicating Gimbal Lock mode is enabled.

1. Via DJI Pocket 2:
a. Swipe up on the touchscreen, then select Recenter or Flip.
b.Press the function button twice to recenter the camera, and press the function button three times to flip the camera.
2.Via DJI Mimo App: Tap the gimbal setting icon on the right side of the screen, and then select Recenter or Flip.

1. Smartphones by using a Lightning or USB-C smartphone adapter;
2. DJI Pocket Do-It-All Handle;
3.Osmo Pocket Wireless Module.

When Pro mode is off, the Directional Audio is set to All by default; When Pro mode is on, you can tap the Pro icon to switch between All, Front, and Front and Back.

Method 1. Connect DJI Pocket 2 to your smartphone, and export the original files by downloading them.
Method 2. Power on DJI Pocket 2, and connect it to a computer through a Type-C cable to view and export all photos and videos.
Method 3. Remove the microSD card and export through a card reader.

Same with Osmo Pocket/Action, DJI Pocket 2 will automatically split the recording without damaging quality when it reaches 4GB.

Yes. Glamour Effects are available in photo and video modes when using Pocket 2 independently and with a smartphone. You can also adjust Glamour Effects parameters further if photos and videos taken with Pocket 2 independently are exported to the phone through the DJI Mimo app.
*Glamour Effects can only be used for 16MP photos and up to 1080/30fps videos.

Connect Pocket 2 to the DJI Mimo app and export the panoramas on the playback page. Note: The microSD card will only save the thumbnail of a panorama for previewing and cannot be exported.

There are several ways to view photos and videos shot on DJI Pocket 2: 1. Via DJI Pocket 2: Swipe the touchscreen to the right and view photos and videos. 2. Via DJI Mimo: With Pocket 2 connected to your smartphone, open Mimo and enter the playback page. 3. Via computer: Remove the microSD card from Pocket 2, insert it into a card reader, and connect with the computer.

Yes. DJI Pocket 2 automatically adjusts the volume.
In Pro mode, you can set the recording volume to Auto, Low, Medium, or High.

D-Cinelike is a color mode that provides better shadow details, offering excellent image quality for color grading. It is the same as the Cine-like color mode in Osmo Pocket.

No. For video playback with audio, connect Pocket 2 to the DJI Mimo app or DJI Pocket 2 Do-It-All Handle.

Yes. This does not affect the stability or the final video, as long as Pocket 2 is not touched during recording.

No. Make sure a microSD card is inserted before shooting.

Stereo recording is on by default. You can choose mono recording in Pro mode by tapping the PRO icon in the top-left corner of the camera view screen.

When recording a video, use the Mini Control Stick or virtual joystick in the Mimo app to zoom in or out, enabling Audio Zoom automatically.

Yes. You can use DJI Pocket 2 with the Do-It-All Handle for livestreaming. Currently, supported platforms include Huya, BiliBili, Kuaishou, Facebook, YouTube, and any platform that supports RTMP.

DJI Pocket 2 cannot charge iOS phones.
When connected to Andriod phones with a smartphone adaptor, Pocket 2 will keep charging the phone at 5 V/500 mA. As a result, the operating time of gimbal will be shortened. To ensure long-term use, it is recommend to connect Pocket 2 with the Do-It-All Handle instead of a phone.

No.

Yes, but we recommend you use the gimbal after it is fully charged because the battery will heat up, and the service life will be shortened when it is charging and operating at the same time. You can also purchase the DJI Pocket 2 Charging Case for extended operating time.

Yes. When taking photos or videos, you can check the top left corner of the screen for available photos or video duration to take.
You can also check the remaining storage in the following situations:
1. In video mode: Remaining storage is displayed when available video duration is more than 100 minutes; available video duration is displayed when it is below 100 minutes.
2. In photo mode: Remaining storage is displayed when available photos are more than 1000; available photos are displayed when it is below 1000.

Download the video to your phone, or directly share it via the DJI Mimo app

After capturing the panorama photos while connected to DJI Mimo, each photo will be saved and stitched into a panorama. The final panorama will only be saved on your phone.
If you shoot panorama photos with DJI Pocket 2 independently, you can view the panorama in Playback using DJI Mimo. If you don't find the panorama on your smartphone, download the panorama again.

No.

1. Via DJI Pocket 2: Swipe down on the screen to access Settings, then tap Calibration.
2. Via DJI Mimo: Tap the icon on the left of the screen, find Gimbal and Handle and then tap Gimbal Auto Calibration.
Purpose:
Calibration can reduce gimbal drift caused by human error or nearby magnetic interference.
Note: Place DJI Pocket 2 on a stable and flat surface and do not touch during calibration.

No, but the DJI Pocket 2 Waterproof Case is available for underwater use at depths of up to 60 m.

DJI Pocket 2 can shoot 4K/60fps video at a bitrate of 100Mbps. Processing such an amount of data in a short time will inevitably cause heating. DJI Pocket 2 is integrated with a passive cooling solution that dissipates heat evenly, ensuring product longevity and consistent performance.

Two smartphone adapters, wide-angle lens, micro tripod, wireless microphone, the Mini Control Stick, and Do-It-All Handle.
Please refer to the following illustration for storage:

Since the gimbal has delicate and sophisticated components, it is strongly recommended to place Pocket 2 inside the cover to protect damage. Please insert the gimbal in the right direction, as illustrated in the Quick Start Guide.

Remove the base by pulling down and replace it with the provided DJI Pocket 2 Tripod Mount (1/4”).
Hold Pocket 2 by the handle horizontally with the screen facing upward. To detach, hold Pocket 2 by the handle and pull the base vertically towards the ground. If you hold the gimbal upright and pull the base directly, it may not be detached.
The purpose of such a design is to fix the tripod mount or any other accessories firmly.

You can use the built-in clip to fix the transmitter on your collar, camera hot shoe, or other cold shoe mounts.

In all directions.

No. Any charger supporting voltage/current higher than 5 V/0.5 A will be limited within this value.

The Do-It-All Handle must be attached to DJI Pocket 2 in order for the Wireless Mic to connect to DJI Pocket 2 and update its firmware. If an update is available, the firmware of the Do-It-All Handle will be updated first. Afterward, the wireless microphone will link and connect with the Do-It-Handle. A prompt will appear onscreen with instructions on how to update the firmware of the wireless microphone.

Swipe down on the touchscreen, tap the Settings icon, tap Accessories, and select Control Stick Speed for adjustment.

Tap the switch button to change gimbal mode between Tilt Lock (only pan axis follows), Follow (tilt and pan axes follow) and FPV (tilt, roll and pan axes follow).

Installation: Hold the mini control stick by its two sides, align it with the universal port, and push to the right until a click is heard.
Removal: Push the control stick to the left until it is completely detached.
Note: You can also refer to the tutorial: DJI Pocket 2 Mini Control Stick User Guide

Use to control gimbal movement or zoom according to the control stick settings.
For gimbal movement control: Move the control stick up and down to control the tilt of the gimbal and move the control stick left and right to control the pan of the gimbal.
For zoom control: Move the control stick up to zoom in and move the control stick up to zoom out.

1. Power on Pocket 2 and swipe down on the touchscreen. Find Accessories under Settings and tap to enable Waterproof Case mode.
2. Swipe down on the touchscreen. Swipe left to find Waterproof Case mode and tap to enable. The Waterproof Case mode icon displays on the top right of the touchscreen of Pocket 2.

No.

The charging case has left enough space for users to take Pocket 2 out. However, if a third-party sticker or screen protector is attached to Pocket 2, it will increase its thickness and make it difficult to remove after charging. Therefore, we suggest users remove all the third-party accessories before putting Pocket 2 into the charging case.

The DJI Pocket 2 Do-It-All Handle is designed to be used with Pocket 2 and includes wireless image transmission, wireless audio reception, and an external speaker. The 3.5mm audio port supports an external microphone, and the 1/4"-20 UNC port at the bottom is compatible with traditional tripods, as well as the DJI Pocket 2 Micro Tripod.

Power on Pocket 2. Launch DJI Mimo and select DJIPocket-xxxxxx, or select the Wi-Fi network named DJIPocket-xxxxxx on your mobile phone. The Do-It-All Handle will connect automatically. (To view the Wi-Fi password on the touchscreen, tap Settings, Accessories, and then Do-It-All-Handle). DJI Mimo can be used once the icon appears on the touchscreen to indicate connection was successful.

After connecting Pocket 2 with the Do-It-All Handle, swipe down on the touchscreen. Swipe left to find the wireless microphone icon and tap to enable linking with the Do-It-All Handle. Power on the wireless microphone and press the linking button. If linking is successful, the linking button can also be used to take photos and videos.

The Do-It-All Handle must be attached to Pocket 2 for firmware updates. Do not turn off the gimbal or disconnect with the handle during a firmware update.

The USB-C port is used to charge DJI Pocket 2 or transmit data.

No. The Do-It-All Handle doesn't have a battery, so it will not charge any device when connected to it.

To attach, remove the detachable base from the bottom of Pocket 2, and then align the Do-It-All Handle. To detach, push down the Do-It-All Handle's unlock button and pull away from Pocket 2.

Besides the color and the accessories in the box, the two gimbal cameras have the exact same functionality. The DJI Pocket 2 Exclusive Combo (Sunset White) contains essential accessories designed for active users. The contents of the DJI Pocket 2 Exclusive Combo (Sunset White) include: DJI Pocket 2 × 1, Cover × 1, Sling Strap × 1, Mini Control Stick × 1, Do-It-All Handle × 1, Power Cable × 1, Wrist Strap × 1, Smartphone Adapter (Lightning) × 1, Smartphone Adapter (USB-C) × 1.

Yes.

Yes.

Yes.