E5000

E5000 PRO

Specifications

Max Thrust14 kg/rotor (44.4 V, Sea Level)
Recommended Battery12S LiPo
Recommended Takeoff Weight4.5 - 7.0 kg/rotor (Sea Level)
Compatible Frame Arm Outer Diameter30 mm
Powertrain Cable LengthPower Cables: 720 mm, Signal Cable & Data Cable: 900 mm
Powertrain Weight (Single)1060 g
Operating Temperature-10° to 50° C

Motor

Stator Size100×10 mm
KV120 rpm/V
Weight520 g

ESC

Max Allowable Voltage52.2 V
Max Allowable Current (Continuous)80 A
Max Peak Current (< 3 sec)120 A
PWM Input Signal Level3.3 V / 5 V Compatible
Operating Pulse Width1120 to 1920 μs
Signal Frequency30 Hz to 500 Hz
Battery12S LiPo

Propeller

Diameter × Thread Pitch28×8 inch (711×203 mm)
Weight (Single Propeller)161 g

E5000 STANDARD

Specifications

Max Thrust14 kg/rotor (44.4 V, Sea Level)
Recommended Battery12S LiPo
Recommended Takeoff Weight4.5 - 7.0 kg/rotor (Sea Level)
Operating Temperature-10° C to 50° C

Motor

Stator Size100×10 mm
KV120 rpm/V
WeightM10: 520 g，M10 Air: 420 g

ESC

Max Allowable Voltage52.2 V
Max Allowable Current (Continuous)80 A
Max Peak Current (< 3 sec)120 A
PWM Input Signal Level3.3 V / 5 V Compatible
Operating Pulse Width1120 to 1920 μs
Signal Frequency30 Hz to 500 Hz
Battery12S LiPo
Dimensions86 mm × 46 mm × 21 mm
Cable LengthThree-phrase Motor Cables:
150 mm, Power Cables: 720 mm,
Signal Cable & Data Cable: 900 mm
Weight (With Cables)189 g

Propeller

Diameter × Thread Pitch28 × 8 inch (711 × 203 mm)
Weight (Single Propeller)161 g

E5000 Propulsion System Performance

e5000

The data above was measured with an input voltage of 44.4 V, at a temperature of 25℃ and sea level. The thrust was adjusted by the throttle.

e5000

The data above was measured at full throttle, at a temperature of 25℃ and sea level.

M10 MOTOR PERFORMANCE
PERFORMANCE DIAGRAM

e5000

I – Current, P – Input Power, η – Electrical Efficiency, T – Thrust, N – Rotational Speed
The data above was measured with an input voltage of 44.4 V, at a temperature of 25℃ and sea level. The rotational speed was adjusted by the throttle.

e5000

η – Efficiency, I – Current, P – Output Power, Τ – Torque, N – Rotational Speed
The data above contain theoretical values measured with an input voltage of 44.4 V, for reference only. When operating at a temperature of 25℃ with no additional cooling devices, the motor cannot operate with a current more than 70 A. It can support short term operation (about 10 to 30 sec) with a current between 40 A and 70 A, and continuous operation with a current under 40 A. The motor run time should depend on the actual environmental temperature and cooling conditions.

DOCUMENTS & MANUALS

  • E5000 Advanced User Manual v1.0
    2018-03-14
    pdf
  • E5000 Pro User Manual v1.0
    2017-01-09
    pdf
  • E5000 Standard User Manual v1.0
    2017-01-09
    pdf

SOFTWARE

  • DJI Assistant 2
    url
Weather-proof and capable of supporting large, heavy-load frames, the E5000 is designed for industrial applications in agriculture, search and rescue, mapping, inspection, and more.
Both the A3 and N3 flight controllers are compatible with the E5000. The E5000’s ESCs, when paired with the A3 and N3 flight controllers, have a protection mechanism for overvoltage, overcurrent, stall and overheat. Additionally, the flight controllers can record critical, real-time information on voltage, current, rotation speed and temperature, enabling further data analysis and maintenance of the system.
No. The 1280S ESCs use Field-Orientated Control (FOC). When working with the M10 or M10 Air, the E5000 provides a quick response with a strong thrust, allowing for extremely agile control over large multirotor aircrafts. However, the FOC algorithm was specially designed for the M10 and M10 Air and will likely not be compatible with other motors due to the specificity of its design.
The E5000’s ESCs have a redundant throttle signal design. When a throttle cable — the PWM cable on the ESCs — accidentally disconnects, the ESCs will automatically switch to a redundant throttle signal. This allows data to be received from the flight controller via a JST 3-pin cable, ensuring safer flight. Please note that the redundant throttle signal only works with DJI’s A3 and N3 flight controllers and that the JST 3-pin cable should be connected correctly between the ESCs and the flight controllers.
No. E5000 ESCs do not support throttle calibration. The PPM input range is 1120us-1920us. However, E5000 ESCs are compatible with different throttle frequencies ranging from 30- 500Hz, supporting an Input Voltage of 3.3V or 5V. The E5000 is therefore widely compatible with most flight controllers on market.
The M10 motor adopts an integrated centrifugal cooling system that combines with a circle of cooling fins at its center, significantly improving cooling capacity. It also has excellent weather-proof features for more extreme environments. The M10 Air is built with a lightweight structure that extends flight time effectively.
Ø30o-0.10 mm.
We Value Your Privacy
We use cookies and other similar technologies to operate and improve our site, as described in our Cookie Policy. With your consent, our third-party partners also use these technologies to collect information about your activities on our websites for analytics and advertising purposes. You can manage your settings at any time through Cookie Preferences.
Do Not Sell or Share My Personal Information
We do not disclose your personal information to third parties in exchange for monetary consideration. Nevertheless, under certain U.S. state privacy laws, such as the California Consumer Privacy Act ("CCPA") and the Virginia Consumer Data Protection Act ("VCDPA"), disclosing personal information for personalized advertising purposes may be considered a "sale" or "sharing" of personal information, or processing for "targeted advertising" purposes. Residents of these U.S. states have the right to opt out of the "sale" or "sharing" of their personal information or the processing of their personal information for "targeted advertising." This opt-out right may vary by state, but we nevertheless offer a unified option for our U.S. customers to exercise this right.

If you want to opt out of the sale or sharing of your personal information or processing for targeted advertising, please deselect the “Marketing Cookies” checkbox through Cookie Preferences. Please note that you will need to opt out on each browser you use.

You can learn more about how we collect, use, and disclose your personal information, as well as other rights and choices you may have, by reviewing our Cookie Policy.
Cookie Preferences
We use different types of cookies on our websites as listed below. They help us to operate and improve our websites, and enable us to provide certain features of our websites and online services to you. View our Cookie Policy for more information.