Support for Osmo Mobile 6

Yes.

The magnetic force of Osmo Mobile 6 is 47.5 Newtons (approximately the force needed to hold two 2-liter soda bottles), more than enough strength to keep smartphones attached securely.

No.

If the Magnetic Phone Clamp is not accurately mounted, the system indicator on the status panel will blink red.
Check if the dot on the back of the phone clamp is aligned with the dot on the roll axis motor of the gimbal. After attaching the smartphone to the gimbal, rotate the roll axis motor to ensure a firm connection between the two. The system status indicator will turn yellow or green when the two dots are aligned.

Due to the layout of wide-angle lenses and/or irregular phone sizes (for example, those of Huawei P40 and Huawei Mate 20 Pro), some users may see the gimbal in their camera view when using a wide-angle camera.
You can try the following: Adjust the position of the Magnetic Phone Clamp by moving it away from the camera until the gimbal is not visible in the camera view (applicable to Huawei Mate 40 Pro+, Huawei Mate 40 Pro, Huawei P40, iPhone 11, iPhone 11 Pro, iPhone 12 Pro, Xiaomi 10 Pro, Vivo X70, Samsung S10+, and more).

No. Due to its powerful motors, accurate balancing is not needed for Osmo Mobile 6.When using the Magnetic Phone Clamp, simply attach it approximately to the middle of the phone.

Osmo Mobile 6 is compatible with most smartphones on the market. It is recommended to use smartphones with a width of 67-84 mm, thickness of 6.9-10 mm, and weight of 170-290 g.
Please visit the official DJI website for the full compatibility list.

Connect your phone to Osmo Mobile 6, launch the DJI Mimo app, and tap the gesture control icon next to the shutter button to enable the function. Tap the “?” icon to view instructions on different gestures.

There are three ways to use ActiveTrack:
1. Press the trigger once to enter the ActiveTrack mode.
2. In the camera view of the DJI Mimo app, frame the subject with your finger to enable ActiveTrack.
3. In the DJI Mimo app, enable gesture control and use the gestures indicated in the “?” icon to begin tracking, take a photo, or record a video.

You can do either of the following:
1. When the gimbal is powered on, press the switch button twice to switch between the two orientations.
2. You can also transition between portrait and landscape by rotating the roll axis manually.

When the gimbal is powered on, press the M button three times to enter standby mode.
Once standby mode is enabled, press any button to exit the mode.

There are two ways of doing this:
1. Switch to SpinShot mode with the M button.
2. When the gimbal is in video, photo, slow motion, or Hyperlapse mode, go to Settings-Gimbal in the DJI Mimo app and enable SpinShot in Follow Mode. Then, you can push the joystick to the left or right to spin the smartphone.

Go to Story mode in the live camera view and select Custom Story.

Tap DynamicZoom mode in the live camera view, and start using this function by walking steadily forward or backward.

Select CloneMe from Pano, tap the shutter button, and Osmo Mobile 6 will automatically take a photo every five seconds and move the gimbal to the next position. After taking three photos, it will automatically stitch them into one photo.

Yes.

Connecting via Bluetooth is faster than Wi-Fi. Devices using Bluetooth will automatically link once they have been paired.
Connecting via Bluetooth also saves power compared to Wi-Fi.

1. Forget the device in the Bluetooth settings of your mobile phone.
2. Press and hold the shutter/record button, switch button, and the trigger simultaneously for one second to forget the connected device.

No. However, the DJI Mimo app will provide the correct firmware version once connected.

Enter the camera view on the DJI Mimo app.
1. In default mode, slide the side wheel on the left to zoom in and out. Image quality is subject to the camera performance of the smartphone.
2. Press the side wheel once to switch to focus control. Image quality is subject to the camera performance of the smartphone.

There are four modes: Upright, Underslung, Side Grip, and Low Position.

No.

1. Check if the alignment dots on the phone clamp and the gimbal are well aligned.
2. Check if the Magnetic Phone Clamp is attached approximately to the middle of the phone.
3. If the issue still exists, perform gimbal auto-calibration and horizontal gimbal adjustment in the DJI Mimo app.

Yes.

215 mm.

1. Extend it to the length you need (up to 215 mm).
2. To adjust the angle, manually rotate the pivot on top of the extension rod to a suitable angle anywhere between 0-90° (this is especially useful for low-angle shooting).

Try the following two ways:
1. Extend the extension rod to a certain length, adjust the angle of the pan axis motor to be parallel with the horizontal plane to get the max tilt angle.
2. Hold the gimbal in the Side Grip position, and push the joystick up and down in gimbal follow mode.

There are two ways of doing this:
1. When the gimbal is unfolded, press and hold the M button to power on or off.
2. When the gimbal is folded, unfold the gimbal and it will automatically power on.

It shows gimbal modes. From left to right are: Follow, Tilt Locked, FPV, and SpinShot.

Appearance:
Osmo Mobile 6 adds a status panel to view the current gimbal mode more conveniently.
Osmo Mobile 6 adds an axis lock to secure the gimbal for convenient storage.
Osmo Mobile 6 adds a side wheel to control zoom and focus.
The joystick of Osmo Mobile 6 has been upgraded to provide a better operating experience.
Function:
Osmo Mobile 6 adds a magnetic alignment detection function. When the dots are not aligned to indicate the correct attachment of the Magnetic Phone Clamp to the gimbal, the system indicator on the status panel blinks red.
Osmo Mobile 6 supports quick launch for more efficient use.
M button of Osmo Mobile 6 can switch between gimbal modes.
Osmo Mobile 6 has an upgraded Magnetic Phone Clamp for a more secure attachment of large phones.